Nov 23, 2024

2015-2016 SLCC General Catalog

2015-2016 SLCC General Catalog [**** ATTENTION: YOU ARE VIEWING AN ARCHIVED CATALOG ****]

Apprenticeship Carpentry JATC Technology: AAS (CTE)

Print Degree Planner (opens a new window) |

Associate of Applied Science | 63 credits minimum

Apprenticeship Division
Taylorsville Redwood Campus, CT 274
General Information, (801) 957-4073
Program Information, (801) 957-4066
www.slcc.edu/apprenticeship
Academic and Career Advising
Academic Advisor, Taylorsville Redwood Campus CT 249, (801) 957-4550

Program Faculty:
Generally, Apprenticeship faculty members are chosen from journeymen who are working in the field with a minimum of six years’ experience. All instructors are hired as adjunct on a semester-by-semester basis.

Program Description: Carpenters in the JATC program construct, remodel, alter or repair wood in combination with other material structures. Carpenters work with wood products, build concrete forms, platforms, structures and work in conjunction with other trades such as iron workers, brick masons and other craft workers. This program is a competency-based national curriculum requiring that all of the modules and 8,000 hours of on-the-job training be completed to sit for the National Comprehensive Examination for a journeyman’s certificate.

The College provides classroom-related and supplemental instruction for apprenticeship programs. Classes are held in the days, evenings, and Saturdays, depending on the program. The College neither provides on-the-job training nor acts as a sponsor for apprentices. Individuals must locate their own sponsors. For individual industry-sponsored programs, students should contact their employers’ training director or the Apprenticeship Office.

The Department of Labor Office of Apprenticeship is the federal registering agency for all Utah programs. For National credentials, students and sponsors need to be registered with the Federal Office of Apprenticeship, 125 South State Street, Suite 2412, Salt Lake City, UT 84138. Sponsors are encouraged to be registered with the Office of Apprenticeship.

Career Opportunities: Apprenticeship students are expected to be employed while participating in related training course work.

Transfer/Articulation Information: Students who earn an AAS degree in Apprenticeship Carpentry JATC Technology have the option to transfer into the Technology Management Bachelor Degree at Utah Valley University. UVU will accept up to 45 technical credits towards this degree.

Program Entry Requirements: All entering students must demonstrate competence for placement into MATH 0990 by scoring a minimum of 75 on the arithmetic portion and 40-53 on the algebra portion of the mathematics College Placement Test, or provide a transcript showing a grade of C or higher in MATH 0920 or MATH 0950 or completing CPA 1470 (Math for the Trades) with a grade of C or higher before registering for the carpentry independent program.

For information on getting started, please visit http://www.slcc.edu/students-future/admissions/index.aspx

Estimated Cost for Students: Tuition per semester: http://www.slcc.edu/cashiering/tuition-and-fees.aspx

Note: Apprenticeship programs are not eligible for financial aid.

Estimated Time to Completion: Apprenticeship programs are composed of two parts: (1) on-the-job training is provided by a sponsor who exposes the apprentice to practical applications in all phases of a particular craft; (2) classroom-related instruction is designed to provide the apprentice with knowledge of theoretical and technical aspects of their craft. Total completion of an apprenticeship program will take up to five years, depending upon the craft.

Program Student Learning Outcomes	Related College-Wide Student Learning Outcomes
	1 - Acquire substantive knowledge. 2 - Communicate Effectively. 3 - Develop quantitative literacies. 4 - Think critically and creatively. 5 - Develop knowledge and skills to be civically engaged. 6 - Develop the knowledge and skills to work with others in a professional and constructive manner. 7 - Develop computer and information literacy.
1. Students will achieve entry-level proficiency in all areas of carpentry as well as advanced training as work experience is added.	1, 2, 3, 4, 5
2. Students will be prepared to continue in the workforce having the necessary workplace skills.	2, 3, 4, 5

General Education Requirements

Core Skills:

Composition (EN) 3 Credits

ENGL 1010 - Intro to Writing (EN)

Quantitative Studies (QS) 5 Credits

CPA 1470 - Math for the Trades (QS)

Communication (CM) 3 Credits

Any approved CM course

Human Relations (HR) 2-3 Credits

Any approved HR course

Distribution Areas: (9 Credits)

Choose three credits from three of the following distribution areas.

Life Sciences (LS)	3-4
Fine Arts (FA)	3-4
Humanities (HU)	3
Interdisciplinary (ID)	3
Physical Science (PS)	3
Social Science (SS)	3

Required Courses: (40 Credits)

Note:

CPA students may still be short credit hours after having completed the major course requirements and general education requirements. If so, additional credit hours from one of the distribution areas will be necessary to meet the 63 credit hour minimum for the AAS degree.

Sample Schedule*

Summer Semester

Students should complete the following course to begin the program in the Fall:

(If CPT score not adequate; required for AAS degree)

CPA 1470 - Math for the Trades (QS)

Total: 0-5

Fall Semester

CPA 1110 - Carpentry - Computer Skills

Total: 5

Spring Semester

CPA 1120 - Carpentry - Concrete Forming

Total: 5

Summer Semester*

Total: 6

Fall Semester

CPA 1210 - Carpentry - Wood Framing

Total: 5

Spring Semester

CPA 1220 - Carpentry - Finish, Interior

Total: 5

Summer Semester*

HR 2-3
Distribution 3

Total: 5-6

Fall Semester

CPA 2310 - Carpentry - Interior Systems

Total: 5

Spring Semester

CPA 2320 - Carpentry - Welding

Total: 5

Summer Semester*

Distribution 6

Total: 6

Fall Semester

CPA 2410 - Carpentry - Blueprint Reading

Total: 5

Spring Semester

CPA 2420 - Carpentry Completion

Total: 5

Advising Notes:

Apprenticeship programs may require a math prerequisite. Classes are to be taken in the sequence in which they are given. A grade of C or better is required in all core courses for passing and receiving clock hours. Some programs may have stricter requirements. Students should check their individual programs for more information on prerequisites and entrance requirements.

Attendance is mandated by federal law and a student cannot pass a course if out of compliance. Failure to complete the necessary coursework or to register in a timely manner for each class will add one full year to the apprentice’s program.

All Major CPA Course Requirements must be taken to complete the apprenticeship curriculum.

It is the students’ responsibility to understand the requirements for their chosen program of study and to examine each course description for details about the prerequisite classes. It is highly recommended that each student meet with the Apprenticeship program advisor prior to starting this program. The program advisor may be reached at (801) 957-4550.

*It is recommended to those students seeking the AAS degree to complete the general education requirements in the summer semesters or the year following completion of all the Apprenticeship core courses.

Additional Program Note:

A Certificate in Carpentry JATC Technology is also available. For more information about this certificate, contact the Apprenticeship Office, Taylorsville Redwood Campus, CT 274, (801) 957-4066.