Skip to Navigation
 
Skip to main content

SLCC Catalog

   
2017-2018 SLCC General Catalog
Salt Lake Community College
   
 
  Dec 15, 2017
 
2017-2018 SLCC General Catalog 
  
2017-2018 SLCC General Catalog

Aerospace/Aviation Technology Maintenance: AAS (CTE)


Return to Programs & Areas of Study Return to: Programs & Areas of Study

Associate of Applied Science | 88 credits minimum

Aerospace/Aviation & Related Technologies Division
International Airport Center
General Information
(801) 957-4073
Program Information (801) 957-2050
Program Website
Academic and Career Advising

Program Faculty
Program Coordinator/Site Administrator - Todd M. Baird
Professor - Brian Williamson
Associate Professor - Todd M. Baird, Steve Mendiola
Assistant Professors - Todd M. Baird

Program Description
Aviation and Related Technologies -Aviation Maintenance Program is designed to prepare students for a career in maintenance and repair of various aircraft and powerplants. This program is designed to give students knowledge and skills for the level required to pass the Federal Aviation Administration written, oral and practical examinations for an airframe and powerplant (A&P) mechanics license. Aircraft technicians are required to perform detailed inspections on airframes and powerplants, preventive maintenance, troubleshoot, repair, install or replace parts relative to airframes and engines. Students will learn both fixed and rotor-wing aircraft as well as reciprocating and turbine engines.

Depending upon the type of work they do, aircraft mechanics and repairman work in hangars, on the flight line, repair stations and fixed base of operations and out stations. They use hand and power tools as well as sophisticated test equipment. A and P’s perform detailed inspections on airframes and powerplants to ensure flight safety. Noise levels are high, and flight line mechanics often work outdoors in inclement weather. Sometimes the work requires physical demands that can be arduous. Aircraft maintenance technicians often work under pressure to maintain flight schedules or minimize inconvenience to customers, but a technician must not sacrifice high standards of workmanship in the process.

The aviation maintenance program conducts drug testing as a requirement of the program.

Career Opportunities
Aircraft technicians troubleshoot, inspect, repair, and replace and install parts on many different types of aircraft, including jets, propeller-driven airplanes, and helicopters. Some A & P Technicians specialize in engines or airframes, but most technicians will be required to work on all aspects of aircraft repair.

Career opportunities include, but not limited to, A&P Technician, Repair station technician, Lead Technician, Inspector, Aircraft Manufacturing and Aerospace Engineer. The long-term employment outlook is very good. There is a current shortage of aviation maintenance technicians, largely due to the considerable attrition of retiring personnel, and to growth in the industry. There are many industries such as amusement parks, power and gas companies that are known to hire Aircraft technicians due to the broad range of training it requires to be an Airframe and Powerplant technician. Employment projections emphasize that well-trained, licensed individuals with a strong background in technical subjects will have little trouble finding work in the aviation industry.

Transfer/Articulation Information
Students who earn an AAS degree in Aerospace/Aviation Technology-Maintenance have the option to transfer into the Technology Management Bachelor Degree at Utah Valley University. UVU will accept up to 45 technical credits towards this degree.

Program Entry Requirements
Students may start this program during the Fall or Spring semesters. There are day and evening classes available. For information on getting started, please visit www.slcc.edu/students-future/admissions.

Estimated Cost for Students

Estimated Time to Completion
If students follow the suggested semester schedule, time to completion is (5) five semesters.

Specialized Accreditation
The Aviation Maintenance Technician program at Salt Lake Community College is one of 150 FAA approved schools in the US, providing students with the extensive knowledge they need in order to succeed in aviation maintenance.

Program Student Learning Outcomes Related College-Wide Student Learning Outcomes
  1 - Acquire substantive knowledge
2 - Communicate effectively
3 - Develop quantitative literacies
4 - Think critically & creatively
5 - Become a community engaged learner
6 - Work in professional & constructive manner
7 - Develop computer & information literacy
1.1 Students will acquire the knowledge and skills necessary to pass the Federal Aviation Administration written/oral and practical exams for the General AMT (A&P) requirement. Curriculum requirements are found at www.faa.gov. Required subject areas required by FAA Part 147 are on file in the Division Office with an assessment plan to address knowledge areas by regulations.
1.2 Students will acquire the knowledge and skills necessary to pass the Federal Aviation Administration written/oral and practical exams for an Airframe AMT (A&P) requirement. Curriculum requirements are found at www.faa.gov. Required subject areas required by FAA Part 147 are on file in the Division Office with an assessment plan to address knowledge areas by regulations.
1.3 Students will acquire the knowledge and skills necessary to pass the Federal Aviation Administration written/oral and practical exams for a Powerplant AMT (A&P) requirement. Curriculum requirements required by FAA Part 147 are found at www.faa.gov. Required subject areas are on file in the Division Office with an assessment plan to address knowledge areas by regulations.
1, 2, 3, 5, 6, 7
2.1 Students will be required to demonstrate effective logbook entries of coursework performed on aircraft during lab assignments.
2.2 Students in the AMT program will complete an oral report of their Return to Service activities in both Airframe and Powerplant courses.
2.3 Students in the AMT program will complete a written report of their Return to Service activities in both Airframe and Powerplant courses.
2, 3, 4, 7
3. Students will be able to apply reasoning and interpret information
represented on data, graphs, and/or tables as it relates to safe
maintenance practices as identified with in the aviation industry.
Operations will include problems and reasoning skills in the areas of:
  1. weight and balance,
  2. sheet metal layout and fabrication,
  3. assembly and rigging,
  4.  Electrical systems repair
  5. Maintenance items on both GA and commercial aircraft piston and turbine aircraft.
2, 3, 4, 6, 7, 8
4. The program will require students to perform Quality Assurance (QA) functions as required for the industry. The requirement for QA will encompass subjects addressed by FAA Part 147 regarding critical safety of flight maintenance tasks. These subjects will include sheet metal, composites, piston engine overhaul, and assembly and rigging of flight controls. 2, 3, 4, 6
5. The program will require students to participate in a return to service program that can be done in partnership with industry or on aircraft purchased for the AMT program. Students work will be IAW industry standards for return to service. 2, 5, 6

General Education Requirements


Core Skills


Composition (EN) 3 Credits


Quantitative Studies (QS) 4 Credits


Communication (CM) 3 Credits


Human Relations (HR) 3 Credits


Distribution Areas (3 Credits)


Choose an additional three credits from one of the following distribution areas.

Life Sciences (LS)   3-4 cr
Fine Arts (FA)   3-4 cr
Humanities (HU)   3 cr
Interdisciplinary (ID)   3 cr
Physical Science (PS)   3 cr
Social Science (SS)   3 cr

Advising Notes


Students who need to take Preparatory Classes prior to entering the program should plan extra time to complete the AMT program. High School Curriculum in Math, Science, and Communication is recommended.

It is the students’ responsibility to understand the requirements for their chosen program of study and to examine each course description for details about the prerequisite classes. It is highly recommended that each student meet with the program advisor prior to starting this program. The program advisor may be reached at (801)957-4550.

Credit for Prior Experience: Any FAA Certification or Military training leading to certification must be reviewed by the Program Coordinator and the FAA. Official copies of FAA Certification and/or Military training must  be submitted for consideration (DD Form 214 and FAA 8610-2).

If a student is seeking the FAA Airframe or Power Plant Certification (without the AAS degree), the AMTT 1160 Math is acceptable. If the student is seeking the AAS degree, MATH 1010 is required. The math course (AMTT 1160 or MATH 1010) must be taken prior to FAA testing.

The following courses are available to prepare students to take FAA Maintenance Tests for federal certification:

  • AMTT 2500 Generals Test Prep
  • AMTT 2501 Airframe Test Prep
  • AMTT 2502 Powerplant Test Prep

Additional courses are available for specific training. For information about these courses and certification, contact the Program Coordinator.

Credit for Prior Experience: Any FAA Certification or Military training leading to certification must be reviewed by the Program Coordinator and the FAA. Official transcripts of certification and/or training (FAA 8610-2 and/or DD214) must be submitted for consideration.

Additional Program Notes


The Aviation Maintenance program offers additional courses for :

Return to Programs & Areas of Study Return to: Programs & Areas of Study